UC3843BVD1R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 60kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UC3843BVD1R2 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). 7.6V~30V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~105°C TA dc switcher. It can switch at Up to 500kHz. dc dc regulator is made easier with Surface Mount. Frequency Control provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 8 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Other relevant dc to dc converter ics can be found by searching "UC384*B". 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. According to the test statistics, DC regulator outputs 5.1V voltage. The dc to dc regulator can only accept a maximum input voltage of 25V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. It is set to 96 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Switching controllers work at 60kHz Hz. To run the voltage regulator dc to dc safely and reliably, users should apply 30V to the voltage regulator dc to dc. When the dc switching is dormant, it uses 12mA.
UC3843BVD1R2 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 60kHz
UC3843BVD1R2 Applications
There are a lot of ON Semiconductor UC3843BVD1R2 DC to DC converter applications.
- PSRR circuits
- Refrigerators of central air conditioners
- Digital display device
- Post equipment
- Serial communication converter
- Smoke exhaust equipment
- Printing equipment
- Medical monitoring systems
- Sensitive electronic devices
- Ball screw pair
