UC3844BD1013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | 0°C~70°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC3844 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Max Supply Current | 17mA |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 15V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
UC3844BD1013TR Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 10V~30V. Workable in an dc switcher where 0°C~70°C TJ is the 0°C~70°C TJrm. Switching can be done at Up to 500kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "UC3844". The switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, DC regulator outputs 5V volts. You should note that the dc dc regulator's usual output current is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 500kHz. In a dormant state, the dc switching uses 12mA. Input voltage can be set to 15V for nominal working status. In the presence of a current greater than 17mA, the component may fail to operate properly and may be damaged.
UC3844BD1013TR Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
UC3844BD1013TR Applications
There are a lot of STMicroelectronics UC3844BD1013TR DC to DC converter applications.
- Computed tomography (CT)
- Motor controller circuits
- Experimental setup
- Driver circuits
- Serial communication converter
- Smoke exhaust equipment
- Program control systems
- Textile machinery
- Shearing machines
- Constant current circuits
