UCC2541PWPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2541 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.2V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Control Features | Enable, Ramp, Reset, Soft Start, Tracking |
| Topology | Buck |
| Min Input Voltage | 8.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 35V |
| Switcher Configuration | SINGLE |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2541PWPG4 Overview
With its 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 8.5V~35V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~105°C TA. A switching controller such as this can switch at a value of 300kHz . dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Ramp, Reset, Soft Start, Tracking. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics can be found by searching "UCC2541". Switching converter has a total of 20 pins. In particular, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 7.2V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 3.5A. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controller operates at 1MHz Hz. In order to satisfy the need, DC to DC voltage regulator has a value of AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE. A circuit should contain 35V in order to ensure the voltage regulator dc to dc runs safely and reliably. A nominal working status is achieved when the input voltage is set to 35V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 35V. 8.5V is the required supply voltage.
UCC2541PWPG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Ramp, Reset, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 1MHz
AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE
UCC2541PWPG4 Applications
There are a lot of Texas Instruments UCC2541PWPG4 DC to DC converter applications.
- Communication system
- Linear guide
- Emergency lighting monitoring equipment
- Sensitive electronic devices
- Packaging
- Product burn-in
- Correction machines
- Digital display device
- USB circuits
- Printing
