UCC25600DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO HAS A CONTROL TECHNIQUE OF PFM |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | UCC25600 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 22.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 18V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 11.5V~18V |
| Control Features | Current Limit, Frequency Control, Soft Start |
| Topology | Half-Bridge |
| Frequency - Switching | 40kHz~350kHz |
| Control Technique | RESONANT CONTROL |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 380kHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC25600DR Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 11.5V~18V. Qualified to work in an dc switcher with -40°C~125°C TJ. Switching can be done at 40kHz~350kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including RESONANT CONTROL. 12V nominal DC switcher's voltage input. Search for "UCC25600" to find other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Test statistics indicate DC regulator outputs 22.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 25mA, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. There is a maximum frequency of 380kHz for this dc regulators. DC to DC voltage regulator has a value of ALSO HAS A CONTROL TECHNIQUE OF PFM to better satisfy the need. When running the voltage regulator dc to dc in a circuit, users should apply 18V to ensure safety and reliability.
UCC25600DR Features
Transistor Driver Outputs
Switching Frequency: 40kHz~350kHz
Current Limit, Frequency Control, Soft Start
RESONANT CONTROL
Max Duty Cycle: 50 %
ALSO HAS A CONTROL TECHNIQUE OF PFM
UCC25600DR Applications
There are a lot of Texas Instruments UCC25600DR DC to DC converter applications.
- Telecommunications equipment
- Balance equipment
- Game consoles
- CNC system
- Electrical power transmission
- Sensitive electronic devices
- Plate bending machines
- Thermal power
- Surge protection circuits
- Textile machinery
