Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
75.608178mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
10V |
Frequency |
1MHz |
Base Part Number |
UCC2805 |
Function |
Step-Up, Step-Up/Step-Down |
Number of Outputs |
1 |
Output Voltage |
4V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
10V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
3.6V~12V |
Control Features |
Frequency Control |
Input Voltage (Min) |
4V |
Topology |
Boost, Flyback, Forward Converter |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
31kHz |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
41ns |
Supply Current-Max (Isup) |
30mA |
Synchronous Rectifier |
No |
Fall Time (Typ) |
44 ns |
Switcher Configuration |
SINGLE |
Output Voltage-Max |
4.06V |
Max Duty Cycle |
50 % |
Output Voltage-Min |
3.94V |
Duty Cycle (Max) |
49% |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UCC2805QDREP Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 3.6V~12V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 31kHz. The Surface Mount value makes it suitable for general dc dc regulator. Frequency Control provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 8 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 10V. You can find other relevant dc to dc converter ics by searching "UCC2805". Switching converter has a total of 8 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4V. A 4V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 1A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 1MHz is used by the switching controller. Voltage 10V must be supplied. It is not recommended to supply more current to the controller than 30mA. We test 4.06V as the dc controller's highest voltage output.
UCC2805QDREP Features
Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2805QDREP Applications
There are a lot of Texas Instruments UCC2805QDREP DC to DC converter applications.
- Geothermal power
- Machining centers
- Current source circuits
- Milling machines
- Driver circuits
- Motor controller circuits
- Sensitive electronic devices
- Digital display device
- Refrigerators of central air conditioners
- Constant current circuits