UCC28084P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC28084 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28084P Overview
As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. For outputs of 2, this dc motor controller is suitable. A solid enclosure of Tube surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.1V~15V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 200kHz position. As it has a Through Hole value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 8. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "UCC28084". There are 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.3V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 500mV. You should note that the dc dc regulator's usual output current is 1A. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controller operates at a frequency of 1MHz.
UCC28084P Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC28084P Applications
There are a lot of Texas Instruments UCC28084P DC to DC converter applications.
- Mobile phones
- Computer monitoring equipment of building
- Household control circuits
- Game consoles
- Magnetohydrodynamic power
- Automatic testing equipment
- Drilling machines
- Grinders
- Electrical power transmission
- Television equipment
