UCC28084PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 400mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz |
| Base Part Number | UCC28084 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28084PW Overview
With its 8-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 4.1V~15V. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Current Limit, Frequency Control for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 10V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UCC28084". There are only 8 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.3V. Statistically, DC regulator outputs 500mV volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 20mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controller operates at 200kHz Hz. The dc switching utilizes 1.5mA when it is in a dormant state.
UCC28084PW Features
Transistor Driver Outputs
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 200kHz
UCC28084PW Applications
There are a lot of Texas Instruments UCC28084PW DC to DC converter applications.
- Digital video recorders
- Alternators
- Smoke exhaust equipment
- Plate bending machines
- PSRR circuits
- Automation technology
- Low output voltage switching power supply circuits
- Lathes
- Gear/thread machining machines
- Game consoles
