UCC28084PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC28084 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28084PWRG4 Overview
Capsuled in the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. A solid enclosure of Tape & Reel (TR) surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.1V~15V and has a 4.1V~15V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at 200kHz. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Frequency Control provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. You can find other relevant dc to dc converter ics by searching "UCC28084". Pins number 8 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4.3V is the minimum required for the dc dc voltage regulator. DC regulator outputs 500mV voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. Switching controllers operate at 1MHz frequencies.
UCC28084PWRG4 Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC28084PWRG4 Applications
There are a lot of Texas Instruments UCC28084PWRG4 DC to DC converter applications.
- Magnetohydrodynamic power
- Various precision measuring detectors
- Window air conditioners
- Imported equipment
- Injection molding machinery
- Constant current circuits
- Flexible manufacturing cells
- Boring machines
- CNC system
- Electric heating, lighting
