UCC28514DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PEAK CURRENT MODE ALSO AVAILABLE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Base Part Number | UCC28514 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.8V |
| Output Current-Max | 3.5A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4mA |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 100μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28514DWR Overview
This product comes in a 20-SOIC (0.295, 7.50mm Width) package.The packaging is Tape & Reel (TR)-shaped.Depending on the device, the mounting type will either be Surface Mount or C.It should be powered by 9.7V~18V's voltage supply.Currently, the device is set to operate at -40°C~105°C o'clock.In addition to POWER FACTOR CONTROLLER WITH POST REGULATOR, the part has other types of ICs.On the gadget, there are several 20 terminals.Currently, the startup current is 100μA.A component's pin number remains 20.In terms of its best part, the device has a number of UCC28514.The switching frequency is 200kHz.The 20 pins are summed up.The system can operate with a minimum input voltage of 10.8V.Switching Regulator or Controllers is a subclass of it in some ways.It has a maximum input voltage (Max) of 15V.An accurate operation is possible with 500kHz as the frequency.At most, it works on 3.5A output currentAs a rule of thumb, the component is always powered by a 12V volt supply.The maximum supply current, Isup, shall not exceed 4mA, which is the maximum voltage.Other features include PEAK CURRENT MODE ALSO AVAILABLE, for example.
UCC28514DWR Features
UCC28514DWR Applications
There are a lot of Texas Instruments UCC28514DWR PFC PMICs applications.
- HMI (Human-Machine Interface)
- FPGA power
- Low Noise Instrumentation
- CPU power supply
- Arduino servo control
- Peripheral devices
- Dashboards
- Pumps
- Measurement and control euipment
- Ethernet condition monitoring vibration sensor
