UCC2893PWRG4

16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2893PWRG4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 275
Description: 16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UCC2893
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	11.1V
Output Type	Transistor Driver
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	150mA
Voltage - Supply (Vcc/Vdd)	8.5V~16V
Control Features	Current Limit, Enable, On Time Control, Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	250kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	19ns
Supply Current-Max (Isup)	3mA
Synchronous Rectifier	No
Fall Time (Typ)	14 ns
Nominal Input Voltage	110V
Switcher Configuration	SINGLE
Max Duty Cycle	73 %
Duty Cycle (Max)	70%
Clock Sync	Yes
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2893PWRG4 Overview

With a 16-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 8.5V~16V volts and has 8.5V~16V supply voltage. Worked in a -40°C~85°C TA dc switcher before. The switching controller is capable of switching at the 250kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control, Ramp, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 12V. UCC2893 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 11.1V. If you are starting a new project, you should note the dc dc regulator's typical output current is 150mA. The maximum duty cycle of this voltage regulator dc to dc is set to 73 % to ensure reliability during power-up and power-down. Switching controllers work at 1MHz Hz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V. 110V is the nominal working voltage. Switching controller is necessary to supply a voltage of 12V. The controller should not be supplied with more current than 3mA.

UCC2893PWRG4 Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz