UCC2894DR
| Parameters | |
|---|---|
| Control Features | Soft Start, Sync |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 19ns |
| Supply Current-Max (Isup) | 3mA |
| Fall Time (Typ) | 14 ns |
| Nominal Input Voltage | 110V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 73 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.7V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2894 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 11.1V |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
UCC2894DR Overview
In the 16-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~105°C TJ °C in order to achieve its full performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 8.5V~16V .A total of 16 terminations have been recorded.The ac/dc converter has a total of 16 pins.A total of 16 pins are present on the ac-dc converter.The UCC2894 family can be used to search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .It has been set to 150mA for the output current.There is 11.1V output voltage from this AC/DC converter.AC to DC converter is able to reach high efficiency when its frequency is 1MHz .When the supply voltage is 12V , the interface IC may conduct.At all times, this AC to DC converter should be set to 12V .
UCC2894DR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
With 16 pins
Output Current at 150mA
Operating Supply Voltage at the range of 12V
UCC2894DR Applications
There are a lot of Texas Instruments UCC2894DR AC DC Converters applications.
- AC?DC USB chargers for Cell Phones
- Low-Voltage I/O System Power
- Handheld/Battery-Powered Systems
- ATX/BTX Auxiliary Power
- Consumer electronics
- Switching AC-DC Charger
- Home Appliance Applications
- Records
- Adapter for ADSL
- Portable Apparatus
