UCC35702D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 700kHz |
| Base Part Number | UCC35702 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Max Output Current | 1.2A |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~15V |
| Control Features | Current Limit, Frequency Control, Sequencing, Soft Start |
| Input Voltage (Min) | 9.6V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 20mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 99 % |
| Input Current | 750μA |
| Clock Sync | Yes |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35702D Overview
It comes in a 14-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8.8V~15V. Qualified to work in an dc switcher with 0°C~70°C TA. The switching controller can be switched at 100kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Frequency Control, Sequencing, Soft Start for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of 14 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 11V is input. Search for "UCC35702" to find other relevant dc to dc converter ics. 14 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 9.6V is the minimum required for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 1V. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 99 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. 700kHz is the frequency of the switching controller. There is a requirement for a 11V supply voltage. There will be 1.2A current output from the dc switcher above 1.2A. Current supplied to the controller should not exceed 20mA. Input of 750μA current flow would satisfy the operation requirements of the switching converter .
UCC35702D Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
Frequency: 700kHz
UCC35702D Applications
There are a lot of Texas Instruments UCC35702D DC to DC converter applications.
- Precision electronic equipment
- Computer application technology
- Scientific testing
- Boring machines
- Automation technology
- Adjustable voltage or current linear circuits
- Fire elevators
- Servo drive system
- Printing equipment
- Ball screw pair
