UCC35702PWTRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Frequency | 700kHz |
| Base Part Number | UCC35702 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~15V |
| Control Features | Current Limit, Frequency Control, Sequencing, Soft Start |
| Input Voltage (Min) | 9.6V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
UCC35702PWTRG4 Overview
The switching controller fits in the 14-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. 8.8V~15V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a 0°C~70°C TA. It can switch at 100kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control, Sequencing, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . 14 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 11V. UCC35702 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 14 pins. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 9.6V. Statistically, the DC regulator outputs 400mV voltage. You should note that the dc dc regulator's usual output current is 100mA. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Switching controller operates at a frequency of 700kHz.
UCC35702PWTRG4 Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz
UCC35702PWTRG4 Applications
There are a lot of Texas Instruments UCC35702PWTRG4 DC to DC converter applications.
- Printing equipment
- Handheld GPS
- Household control circuits
- USB circuits
- Alternators
- Servo drive system
- Drilling machines
- Computed tomography (CT)
- Emergency lighting monitoring equipment
- Computer monitoring equipment of building
