UCC3585N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | UCC3585 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 6.3V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 485kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3585N Overview
The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 3V~5.5V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where 0°C~85°C TA is the 0°C~85°C TArm. It can switch at 500kHz. Through Hole makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 16 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 3.3V nominal DC switcher's voltage input. UCC3585 can be searched for other relevant dc to dc converter ics. There are 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 3V. Based on the test statistics, DC regulator outputs voltage 900mV. The dc to dc regulator is limited to 6.3V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. The Through Hole makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 485kHz. When running the voltage regulator dc to dc in a circuit, users should apply 5V to ensure safety and reliability.
UCC3585N Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
UCC3585N Applications
There are a lot of Texas Instruments UCC3585N DC to DC converter applications.
- Packaging
- Hydrogen power
- Automatic plug-in machines
- Domestic water pumps
- Smart grid
- Shearing machines
- Electrical distribution systems
- Die casting equipment
- Milling machines
- Computer-related products
