UCC3806Q
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC3806 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 11.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 47kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 35 ns |
| Nominal Input Voltage | 14.5V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3806Q Overview
It comes in a 20-LCC (J-Lead) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 2. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 8V~14.5V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. With this switching controller, you can switch at 47kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 20 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "UCC3806". There are a total of 20 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, the DC regulator outputs 11.9V voltage. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controllers operate at 1MHz frequencies. 14.5V is the nominal working voltage. The nominal supply current for this the controllers dc is 1mA.
UCC3806Q Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3806Q Applications
There are a lot of Texas Instruments UCC3806Q DC to DC converter applications.
- Flexible manufacturing cells
- Various precision measuring detectors
- Industrial robots
- Driver circuits
- Power supplies of electronic gadgets
- CMM
- Hydraulic presses
- Refrigerators of central air conditioners
- Precision electronic equipment
- USB circuits
