UCC38086D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC38086 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.3V |
| Topology | Buck, Boost, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC38086D Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.1V~15V. Worked in an dc switcher with a 0°C~70°C TA rating. With this switching controller, you can switch at 200kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. Various 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. Search for "UCC38086" to find other relevant dc to dc converter ics. Switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 4.3V. DC regulator outputs 500mV voltage based on test statistics. You should note that the dc dc regulator's usual output current is 1A. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 1MHz Hz.
UCC38086D Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC38086D Applications
There are a lot of Texas Instruments UCC38086D DC to DC converter applications.
- Alternators
- Surface processing equipment
- Combined machine tools
- Direct power supply system
- Cutting machine tools
- Game consoles
- Product testing
- Network technology
- Hydraulic presses
- Scientific research
