UCC3808D-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 650mW |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Frequency Control |
| Topology | Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 194kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 10V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808D-2 Overview
This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 4.1V~15V is the operating voltage and supply voltage of the dc control. Qualified to work in a 0°C~70°C TA dc switcher. The switching controller can be switched at 194kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. In addition to "UCC3808", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 500mV. You should note that the dc dc regulator's usual output current is 100mA. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1MHz is used by the switching controller. You can set the input voltage to 10V for nominal working status. There must be a voltage supply of 10V volts.
UCC3808D-2 Features
Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3808D-2 Applications
There are a lot of Texas Instruments UCC3808D-2 DC to DC converter applications.
- USB circuits
- Digital display device
- Sink circuits
- Low output voltage switching power supply circuits
- Program control systems
- Textile machinery
- Imported equipment
- Household control circuits
- Ball screw pair
- Production lines
