V62/04649-01XA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 144 |
| Weight | 325.906118mg |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.83.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.71V |
| Memory Size | 32kB |
| RAM Size | 64kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Frequency (Max) | 100MHz |
| Data Bus Width | 16b |
| Address Bus Width | 23 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| RAM (words) | 32768 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 1.4mm |
| Length | 12mm |
| RoHS Status | Non-RoHS Compliant |
V62/04649-01XA Overview
144 terminations are available for its use.1.8V is the supply voltage.There are pins on the 144 component.An overview of its configuration can be found in the section on 144 pins.To operate at 100MHz frequency, the device has a specific design.Surface Mount is used as the mounting method.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.This device requires a minimum voltage of 1.71V.This device can be powered by 3.6V voltages.1.8V is the supply voltage for this device.Its memory can be used to store 32kB data.It is supplied with 1.83.3V electric power.A further set of features can be provided by this electronic part for ALSO REQUIRES 3.3V SUPPLY as well.It employs DIGITAL SIGNAL PROCESSOR, OTHER as its uPs/uCs/Peripheral ICs type.It is recommended that the operating temperature be lower than 100°C.It is recommended that the operating temperature exceeds -40°C.Below 100MHz, its frequency should be kept at its maximum.
V62/04649-01XA Features
Operating supply voltage of 1.8V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
V62/04649-01XA Applications
There are a lot of Texas Instruments V62/04649-01XA DSP applications.
- Smart camera
- Compression of videos
- Automobiles
- Statistical signal processing
- Geoscience signal processing
- Digital image processing, data compression
- Processing system
- Image signal processing
- Vehicle electronics
- Image compression
