VN920DB5-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | P2PAK (4 Leads + Tab) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN920 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 18m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 4.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN920DB5-E Overview
As you can see, it's packaged in the way of a Tube.This package is included in P2PAK (4 Leads + Tab).In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Auto Restart features.This object belongs to the VN920 family.A total of 4 terminations can be found in it.In order to operate, 5 pins are used.It has 1 functions.Maximum output current falls to 30A when operation criteria are met.As long as the supply voltage is 13V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.A total of 4 pins are present on it.It is part of the VIPower? series.The output current is set to 30A in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 36V.This part has a power supply of 8/36V volts.
VN920DB5-E Features
Supplied from 13V
VN920DB5-E Applications
There are a lot of STMicroelectronics VN920DB5-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Telecom and Network Systems
- Mobile Communication Devices
- USB Power Distribution
- Wireless/Networking Cards
- Solid-State Drives
- Gaming
- HDD and SSD
- Set-top-box
