VND3NV04-1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Weight | 3.949996g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND3N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND3NV04-1 Overview
A Tube is used to package it.It is included with the TO-251-3 Short Leads, IPak, TO-251AA package as well.Mounting type Through Hole is selected for the LED driving board.This switch is of type General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.It is part of the VND3N family of LED drivers.A total of 3 terminations can be found in it.In order to operate, 3 pins are used.It has 1 functions.The maximum output current must drop to 5A to meet the operation criteria.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are present on it.There is 120mOhm resistance on the LED driver.The OMNIFET II?, VIPower? series includes this electrical component.The output current is set to 3.5A in this case.This system has a maximum current requirement of 100μA.
VND3NV04-1 Features
Resistance of 120mOhm
VND3NV04-1 Applications
There are a lot of STMicroelectronics VND3NV04-1 Power Switches ICs applications.
- Portable Devices
- Hot Swap
- Wireless Headsets
- Solid-State Drives
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- USB Power Distribution
- USB Protection
- Set-top-box
- Handheld Devices
