VNP20N07FI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | ISOWATT-220-3 |
| Number of Pins | 220 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 34W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Base Part Number | VNP20N |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 34W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 20A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 20A |
| Rds On (Typ) | 50m Ω (Max) |
| Drain to Source Resistance | 50mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNP20N07FI Overview
It is packaged in the form of a Tube.The ISOWATT-220-3 package contains it.In this case, the LED driving board is mounted as Through Hole.It owns General Purpose switch type.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.Status Flag features are available on the lighting driver.It comes under the family of VNP20N.It contains 3 terminations.The 220 pins are used for the operation of the system.There are 1 functions of the LED driver.This results in the maximum output current dropping to 14A to meet the operation criteria.The lighting driver is mounted in the direction of Through Hole.A total of 3 pins are present on it.In this case, there is 50mOhm resistance in the LED driving board.There is an electrical component included in the OMNIFET?, VIPower? series.The output current is set to 14A in this case.It is recommended to set the supply voltage to 18V for optimum efficiency.It operates at a maximum current of 250μA.
VNP20N07FI Features
Resistance of 50mOhm
VNP20N07FI Applications
There are a lot of STMicroelectronics VNP20N07FI Power Switches ICs applications.
- Handheld Devices
- PC Card Hot Swap
- Low Voltage I/O System Power
- USB Power Distribution
- USB Ports/Hubs
- Mobile Communication Devices
- Wearable Devices
- Notebook and Tablet Computers
- Notebook PC
- USB Protection
