VNQ7140AJ-E

N-Channel 0.5mm PMIC VIPower? Series VNQ7140 16 Pin 13V 16-PowerLFSOP (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-VNQ7140AJ-E
Package: 16-PowerLFSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 382
Description: N-Channel 0.5mm PMIC VIPower? Series VNQ7140 16 Pin 13V 16-PowerLFSOP (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerLFSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Series	VIPower™
Feature	Auto Restart, Status Flag
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	13V
Terminal Pitch	0.5mm
Base Part Number	VNQ7140
Number of Outputs	4
Output Type	N-Channel
Max Output Current	8A
Supply Voltage-Max (Vsup)	28V
Supply Voltage-Min (Vsup)	4V
Interface	On/Off
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	16mA
Input Type	Non-Inverting
Turn On Delay Time	120 μs
Switch Type	General Purpose
Turn-Off Delay Time	100 μs
Ratio - Input:Output	1:1
Voltage - Load	4V~28V
Fault Protection	Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO
Rds On (Typ)	140m Ω
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction	SINK
Height Seated (Max)	1.7mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VNQ7140AJ-E Overview

As you can see, it's packaged in the way of a Tube.It is included with the 16-PowerLFSOP (0.154, 3.90mm Width) package as well.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Auto Restart, Status Flag features.It is part of the VNQ7140 family of LED drivers.The termination count is 16.The operation is carried out using the 16 pins.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 8A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this lighting driver.This electrical component is included in the VIPower? series.The LED driver is configured with a maximum supply voltage of 28V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4V.The maximum current required for its operation is 16mA.