XC9220D093MR-G
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| JESD-30 Code | R-PDSO-G5 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.2V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 2.8V~16V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 2.8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 100% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | XC9220 |
| JESD-609 Code | e3 |
XC9220D093MR-G Overview
It comes in the SC-74A, SOT-753 package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 2.8V~16V. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller is capable of switching at the 300kHz position. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Enable, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 5 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. Switching converter is a special type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 2.8V. A 1.2V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 3A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. It is suggested that users apply 16V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. A dc to dc voltage regulator in the XC9220 series, it belongs to this family.
XC9220D093MR-G Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
XC9220D093MR-G Applications
There are a lot of Torex Semiconductor Ltd XC9220D093MR-G DC to DC converter applications.
- Handheld GPS
- Wide-range voltage regulation circuits
- Laboratories
- Smoke exhaust equipment
- Hydrogen power
- Textile machinery
- Automation technology
- Plate bending machines
- Imported equipment
- Electrical distribution systems
