ZL2006ALNFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Digital-DC™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 0.54 V TO 5.5 V OUTPUT RANGE |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ZL2006 |
| JESD-30 Code | S-XQCC-N36 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Soft Start, Tracking |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~1.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 95% |
| Serial Interfaces | I2C, PMBus, SMBus |
| Height Seated (Max) | 0.9mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
ZL2006ALNFT Overview
It comes in a 36-VFQFN Exposed Pad package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 3V~5.5V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 200kHz~1.4MHz with this switching controller. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Soft Start, Tracking. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at QUAD . A variety of 36 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. ZL2006 can be searched for other relevant dc to dc converter ics. It is recommended that the input voltage of the dc dc voltage regulator be 3V. The value of DC to DC voltage regulator is set at 0.54 V TO 5.5 V OUTPUT RANGE in order to fulfill the requirements more effectively. The dc to dc voltage regulator is from the Digital-DC? series.
ZL2006ALNFT Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1.4MHz
Current Limit, Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
0.54 V TO 5.5 V OUTPUT RANGE
ZL2006ALNFT Applications
There are a lot of Renesas Electronics America Inc. ZL2006ALNFT DC to DC converter applications.
- Balance equipment
- Special machining machine tools
- seismic instrument power circuits
- Radio equipment
- Pipe bending machines
- Electric heating, lighting
- Refrigerators of central air conditioners
- Experimental setup
- Terrestrial set-top boxes
- Medical equipment
