ZXLD1374EST20TC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXLD1374 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Output Voltage | 60V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 6.3V |
| Output Current | 1.5A |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 6.3V |
| Max Input Voltage | 60V |
| Output Current per Channel | 1.5A |
| Current - Output / Channel | 1.5A Switch |
| Max Output Power | 500mW |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 16 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 8V |
| Multiplexed Display Capability | NO |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ZXLD1374EST20TC Overview
The board's 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space. LED drivers have a total of 1 outputs that are used in the design of the drivers.This mounting method is Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.-40°C~125°C TJ is the operating temperature and it works fine.In order for it to operate, it has 20 terminations.There are 20 pins used to form the base of its configuration.Undetermined failures will occur if the voltage supply is less than 8V.The number of segments is estimated to be 16.The device has been mounted on the Surface Mount.ZXLD1374 is the base part number for this LED driver.60V is an acceptable voltage.A device with 20 pins is available.As a result, it can also be classified as Display Drivers.The input voltage must be minimally 6.3V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 6.3V.60V is the maximum value of the supply current.A load can be supplied with 1.5A current.Having the switching frequency at 1MHz enables this electronic component to perform at its best.LED drivers belonging to the Automotive, AEC-Q100 series have a wide range of applications.There is 60V voltage at the output terminal.
ZXLD1374EST20TC Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 60V
ZXLD1374EST20TC Applications
There are a lot of Diodes Incorporated ZXLD1374EST20TC LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Portable lighting
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Medical surgery lighting
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Constant Voltage Power Source for portable equipment
