banner_page

24AA08-I/SN

2/5V V Surface Mount 8 Pin Memory IC 24AA08 8 kb kb 4.9mm mm 3mA mA


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-24AA08-I/SN
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 706
  • Description: 2/5V V Surface Mount 8 Pin Memory IC 24AA08 8 kb kb 4.9mm mm 3mA mA (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Additional Feature 2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED
Technology CMOS
Voltage - Supply 1.7V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 24AA08
Pin Count 8
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 2/5V
Supply Voltage-Min (Vsup) 1.7V
Interface 2-Wire, I2C, Serial
Memory Size 8Kb 256 x 8 x 4
Nominal Supply Current 3mA
Memory Type Non-Volatile
Clock Frequency 400kHz
Access Time 900ns
Memory Format EEPROM
Memory Interface I2C
Write Cycle Time - Word, Page 5ms
Density 8 kb
Standby Current-Max 0.000001A
Serial Bus Type I2C
Endurance 1000000 Write/Erase Cycles
Write Cycle Time-Max (tWC) 5ms
Data Retention Time-Min 200
Write Protection HARDWARE
I2C Control Byte 1010XMMR
Height 1.5mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Tin

24AA08-I/SN Overview


A Non-Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tube case as well. As you can see, it is embedded in 8-SOIC (0.154, 3.90mm Width) case. The chip has an 8Kb 256 x 8 x 4 memory. This device uses takes advantage of the EEPROM format. -40°C~85°C TA is an extended operating temperature range, making this device ideal for demanding applications. A supply voltage of 1.7V~5.5V can be applied to it. It is recommended that the mounting type be Surface Mount. A total of 8 terminations have been planted on the chip. In total, 1 functions are supported by this part. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. In order to operate effectively, the memory rotates at a clock frequency within a range of 400kHz. As the base part number for the device, 24AA08 is frequently used to select similar items. An 8-pin package is used to package this memory device. There are 8 pins on this memory device, which indicates it has 8 memory locations in it. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. The nominal supply current of this memory component is 3mA. This chip features all the merits of a conventional chip, but it also features 2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED to improve system performance. There is only a single power supply required for this memory chip. The I2C-type serial bus this memory integrates with is helpful for transferring data to the CPU.

24AA08-I/SN Features


Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Additional Feature:2-WIRE SERIAL INTERFACE; DATA RETENTION > 200 YEARS; 1000000 ERASE/WRITE CYCLES GUARANTEED

24AA08-I/SN Applications


There are a lot of Microchip Technology 24AA08-I/SN Memory applications.

  • graphics card
  • data buffer
  • personal computers
  • multimedia computers
  • cell phones
  • nonvolatile BIOS memory
  • DVD disk buffer
  • servers
  • printers
  • supercomputers

Write a review

Note: HTML is not translated!
    Bad           Good