24AA08T-I/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 24AA08 |
| Pin Count | 5 |
| Supply Voltage-Min (Vsup) | 1.7V |
| Interface | 2-Wire, I2C, Serial |
| Memory Size | 8Kb 256 x 8 x 4 |
| Nominal Supply Current | 3mA |
| Memory Type | Non-Volatile |
| Clock Frequency | 400kHz |
| Access Time | 900ns |
| Memory Format | EEPROM |
| Memory Interface | I2C |
| Organization | 1KX8 |
| Write Cycle Time - Word, Page | 5ms |
| Density | 8 kb |
| Standby Current-Max | 0.000001A |
| Serial Bus Type | I2C |
| Endurance | 1000000 Write/Erase Cycles |
| Data Retention Time-Min | 200 |
| Write Protection | HARDWARE |
| I2C Control Byte | 1010XMMR |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
24AA08T-I/OT Overview
There is a Non-Volatile memory type associated with this device. Case Tape & Reel (TR) is available. The file is embedded in a SC-74A, SOT-753 case. The memory size of the chip is 8Kb 256 x 8 x 4 Mb. This device uses a EEPROM-format memory, which is of mainstream design. The device's extended operating temperature range of -40°C~85°C TA makes it ideal for many demanding applications. A supply voltage of 1.7V~5.5V can be applied to it. There is a recommended mounting type of Surface Mount for it. 5 terminations are planted on the chip. For a comprehensive working procedure, this part supports as many as 1 functions. There is a requirement for 2.5V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 400kHz. As the base part number for the device, 24AA08 is frequently used to select similar items. The ic memory chip comes in a package with 5 pins that allows it to be connected to a computer. The memory device has 5 pins, which means that it has 5 memory locations, which indicates it is an 5-bit device. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. There is a nominal supply current rating of 3mA for this memory component. Data is carried and transferred to the CPU by the I2C-type serial bus this memory integrates with.
24AA08T-I/OT Features
Package / Case: SC-74A, SOT-753
5 Pins
24AA08T-I/OT Applications
There are a lot of Microchip Technology 24AA08T-I/OT Memory applications.
- networks
- workstations,
- mainframes
- hard disk drive (HDD)
- multimedia computers
- nonvolatile BIOS memory
- supercomputers
- cell phones
- telecommunications
- personal digital assistants
