5962-9325801M2A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | OP467 |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Number of Elements | 4 |
| Nominal Supply Current | 10mA |
| Current - Supply | 8mA |
| Slew Rate | 170V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 28MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 21000 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.6μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Length | 8.89mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-9325801M2A Overview
A 20-CLCC case is used to package the op amp. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 20 terminations. In total, there are 20 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 20 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 500μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C TA for optimal performance. 83dB should remain the voltage gain. This linear amplifier has a total of 4 elements. It is recommended that you use an 8mA power supply with this electrical part in order for it to operate correctly. This buffer amplifier is assigned within the Military, MIL-STD-883 series by its manufacturer.
5962-9325801M2A Features
20 Pins
supply voltage of 5V
83dB voltage gain
5962-9325801M2A Applications
There are a lot of Analog Devices Inc. 5962-9325801M2A Instrumentational OP Amps applications.
- Hand-held batteries
- Communication device
- Tablets
- Cinema or auditorium audio system
- Broadcasting
- Fission chambers
- Car stereo
- Polarized electrodes
- Blood pressure sensors
- Automatic control
