banner_page

71M6543FT-IGT/F

71M6543FT-IGT/F datasheet pdf and PMIC - Energy Metering product details from Maxim Integrated stock available at Noco


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-71M6543FT-IGT/F
  • Package: 100-LQFP
  • Datasheet: PDF
  • Stock: 280
  • Description: 71M6543FT-IGT/F datasheet pdf and PMIC - Energy Metering product details from Maxim Integrated stock available at Noco(Kg)

Details

Tags

Parameters
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Interface I2C, UART
Memory Size 64kB
Analog IC - Other Type ANALOG CIRCUIT
Number of I/O 51
RAM Size 5kB
Memory Type FLASH
Data Bus Width 8b
Supply Current-Max (Isup) 8.7mA
Max Frequency 5MHz
Number of UART Channels 2
Meter Type 3 Phase
Measurement Error 0.1%
Voltage - I/O Low 0.8V
Voltage - I/O High 2V
Height Seated (Max) 1.6mm
Length 14mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 100-LQFP
Number of Pins 100
Weight 1.319103g
Operating Temperature -40°C~85°C
Packaging Tray
Published 2013
Series Single Converter Technology®
Pbfree Code no
Part Status Discontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
ECCN Code EAR99
Subcategory Other Analog ICs
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Number of Functions 1

71M6543FT-IGT/F Overview


Packed in a Tray. Packet 100-LQFP. It is suitable for use as a 3 Phase meter. We have it in Surface Mount. -40°C~85°C's operational temperature is extended. 3V~3.6V power supply is used to operate it. The PMIC comes equipped with low-level I/O ports that have a voltage of 0.8V. When using this device for high-level I/Os, the voltage presented by it is 2V. There are 100 terminations included in this part. PMIC analog ANALOG CIRCUIT IC with high power. The normal voltage required for the part is 3.3V. The device requires a voltage of 3V or higher to operate. It is recommended that the maximum voltage that can be applied to the device should be kept below 3.6V. Application-specific 100 solution for logic gates. Installing and dismounting it is easy with the Surface Mount design. It should be noted that this is a Other Analog ICs for specialized needs. It's allowed to operate at a voltage no higher than 8.7mA. As part of the Single Converter Technology? series, it is included. This device can be supplied using 3.3V. It can operate up to 5MHz Hz. As part of this PMIC, the memory size 64kB is included. FLASH memory is used by the PMIC.

71M6543FT-IGT/F Features


3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.

71M6543FT-IGT/F Applications


There are a lot of Maxim Integrated 71M6543FT-IGT/F Energy Metering ICs applications.

  • Subsystem Power Measurement
  • General Purpose Energy Measurement
  • Power Monitoring for Home Automation
  • Power monitoring/power budgeting
  • Intelligent Power Distribution Units
  • Telecom Infrastructure
  • Base Station Power Distribution Systems
  • Telecommunications and data communications equipment
  • Server Backplane Systems
  • Central office equipment

Write a review

Note: HTML is not translated!
    Bad           Good