7200L20J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L20J8 Overview
PLCC is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.32 terminations are contained in FIFO means.32 pin is used for operation.FIFO design requires a maximum current of 80mA to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 32 pins on this FIFO memory IC.Normaly, the component is powered by 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.This FIFO memory IC operates at a frequency of 33.3MHz .
7200L20J8 Features
FIFOs category
Clock frequency of 33.3MHz
7200L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L20J8 FIFOs Memory applications.
- Programmable Logic Controller
- Firmware loaders
- Battery Charger
- Test Equipment
- High-speed disk
- IP Camera Buffer
- Analog-to-digital converters
- Queues for communication systems
- MP3 Interface for Automobile
- Industrial Systems
