7200L35TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L35TP Overview
PDIP is a package that contains FIFO memory chip.The package comes in a case of Bulk .Mounting it in the Through Hole way is recommended.A supply voltage of 5V allows for high efficiency.In FIFO means, there are 28 terminations.As far as the operation pins are concerned, they are 28 pins.In order to operate FIFO design, a maximum current of 80mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.The FIFO memory IC is equipped with a total of 28 pins.Normally, the FIFO memory's maximum value is 50MHz .Normaly, the component is powered by 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
7200L35TP Features
FIFOs category
Frequency at most
7200L35TP Applications
There are a lot of Integrated Device Technology (IDT) 7200L35TP FIFOs Memory applications.
- Consumer Systems
- Measurement Equipment
- Signal processing
- Code converters
- Down-Hole Energy Drilling
- Battery Charger
- Tape controllers
- Video Processing
- Computer Systems
- Temporary storage elements
