7202LA12PDG
| Parameters | |
|---|---|
| Memory Width | 9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.576mm |
| Width | 15.24mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Memory Type | SDR |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
7202LA12PDG Overview
FIFO memory chip is contained in the CDIP package.There's a Bulk on the package.A FIFO chip's memory is 1.1kB , which may be used to store applications and data.The recommended mounting way is Through Hole .Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 28 terminations.28 pin is used for operation.There is a maximum current requirement of 80mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.A total of 28 pins are present on the FIFO memory IC.A FIFO memory's maximum value of 50MHz can be used for regular operation.It is normal for the component to own 5V power supplies.Using this gadget, RETRANSMIT can also be generated.
7202LA12PDG Features
1.1kB memory size
FIFOs category
Frequency at most
7202LA12PDG Applications
There are a lot of Integrated Device Technology (IDT) 7202LA12PDG FIFOs Memory applications.
- Portable Information Devices
- Data-acquisition systems
- General Data Collection Applications at Low-Temperatures
- IP Camera Buffer
- High-speed disk
- GPS Offender Tracking
- Communications Systems
- Transistors
- Smart Meter
- Telecommunication
