7202LA20J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA20J8 Overview
The PLCC package contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 32 terminations.These are the 32 pins for operation.In order to operate it, it requires 80mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The clock of the FIFO memory IC runs at 33.3MHz frequency.
7202LA20J8 Features
FIFOs category
Clock frequency of 33.3MHz
7202LA20J8 Applications
There are a lot of Integrated Device Technology (IDT) 7202LA20J8 FIFOs Memory applications.
- Product traceability
- Event Recorder
- IP Camera Buffer
- Consumer Systems
- HDD
- Signal processing
- SPD for DDR3 Memory Modules
- Fabrication Site
- Cameras
- Data
