72205LB25TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB25TFI Overview
You can find FIFO memory chip in the LQFP package.The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.In FIFO means, there are 64 terminations.64 pin is used for operation.FIFO requires a minimum of 60mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 40MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .A component normally has 5V power supplies attached to it.
72205LB25TFI Features
FIFOs category
Frequency at most
72205LB25TFI Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25TFI FIFOs Memory applications.
- Fabrication Site
- Switches
- Signal processing
- Video time base correction
- Multi-stage synchronizer
- Tape controllers
- Analog-to-digital converters
- General Data Collection Applications at Extreme High-Temperatures
- Network bridges
- IP Radio
