72211L25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L25PFI Overview
FIFO memory chip is contained in the TQFP package.Mounting it in the Surface Mount way is recommended.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 32 terminations.32 pins are used for operation.FIFO design requires a maximum current of 35mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.As a result, it contains a total of 32 pins.With a frequency of 40MHz , it maintains good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72211L25PFI Features
FIFOs category
Frequency at most
72211L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72211L25PFI FIFOs Memory applications.
- Programmable Logic Controller
- Controlled baseline
- Seismic Data Collection at Extreme Temperatures
- IP Camera Buffer
- Portable Information Devices
- General Data Collection Applications at Extreme High-Temperatures
- Product traceability
- Test Equipment
- Video
- IP Radio
