72225LB15TFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72225LB15TFGI Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V , high efficiency is possible.64 terminations are contained in FIFO means.There are 64 pins for operation.In order to operate FIFO design, a maximum current of 60mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 64 pins are attached to it.It maintains good accuracy at a 66.7MHz frequency.During regular operation, 66.7MHz is the FIFO memory's maximum value.It is normal for the component to own 5V power supplies.
72225LB15TFGI Features
FIFOs category
Frequency at most
72225LB15TFGI Applications
There are a lot of Integrated Device Technology (IDT) 72225LB15TFGI FIFOs Memory applications.
- Video
- High-speed disk
- Product traceability
- Medical Monitoring Device
- Game Consoles
- Cameras
- Battery Charger
- Analog-to-digital converters
- Signal processing
- Telecommunication
