723632L15PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 120 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
723632L15PFG Overview
You will find FIFO memory chip in the LQFP package.The recommended mounting method for this FIFO products is Surface Mount .120 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 400mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.The memory logic's maximum value is 66.7MHz for regular operation.
723632L15PFG Features
Frequency at most
723632L15PFG Applications
There are a lot of Integrated Device Technology (IDT) 723632L15PFG FIFOs Memory applications.
- Down-Hole Energy Drilling
- Medical Monitoring Device
- Controlled baseline
- IP Camera Buffer
- SPI Bus Flash Memory Device
- Cardiac Monitoring Device
- Address mapping
- Signal processing
- Consumer
- Test site
