723651L20PFI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Organization | 2KX36 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723651L20PFI Overview
You can find FIFO memory chip in the TQFP package.Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .I found that it has 120 terminations in FIFO means.120 pins are used for operation.The maximum current required for its operation is 400μA .In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It has a total of 120 pins on it.It is capable of maintaining good accuracy with a frequency of 50MHz .Regular operation has a FIFO memory's maximum value of 50MHz .A component normally has 5V power supplies attached to it.It is also possible to generate MAIL BOX; RETRANSMIT by using this FIFO memory.
723651L20PFI Features
FIFOs category
Frequency at most
723651L20PFI Applications
There are a lot of Integrated Device Technology (IDT) 723651L20PFI FIFOs Memory applications.
- Firmware loaders
- Fabrication Site
- Microprogramming
- Programmable Logic Controller
- SPI Bus Flash Memory Device
- Consumer
- Test Equipment
- High-speed disk
- Wireless
- Smart Meter
