72413L25SOG8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 25MHz |
| Access Time | 25 ns |
| Organization | 64X5 |
| Density | 320 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 5b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72413L25SOG8 Overview
FIFO memory chip is included in the SOIC package.Surface Mount is recommended as the mounting method.A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 20 .In the case of the operation pins, they are 20 pins.In order to operate it, it requires 60mA volts of current.A 5V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 20 pins are attached to it.A component normally has 5V power supplies attached to it.It is also possible to generate FALL THRU 40NS using this FIFO memory.This FIFO memory IC operates at a frequency of 25MHz .
72413L25SOG8 Features
FIFOs category
Clock frequency of 25MHz
72413L25SOG8 Applications
There are a lot of Integrated Device Technology (IDT) 72413L25SOG8 FIFOs Memory applications.
- Measurement Equipment
- Thermal Management for DDR3 Memory Modules
- Portable Information Devices
- Video time base correction
- PC peripheral
- Microprogramming
- MP3 Interface for Automobile
- Firmware loaders
- Fabrication Site
- Portable Information Devices
