72615L35PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 28MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 230mA |
| Max Supply Current | 230mA |
| Frequency (Max) | 28MHz |
| Access Time | 21 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.23A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 35 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72615L35PF8 Overview
You will find FIFO memory chip in the TQFP package.It comes in a Tape & Reel package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.FIFO design requires 230mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.FIFOs contains this gadget in its entirety.ICs of type BI-DIRECTIONAL FIFO are used in the FIFO memory chip.Low supply voltages, such as 4.5V V, may be required for operation.An input voltage of 5.5V V is the maximum that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.A frequency of 28MHz is capable of maintaining good accuracy.During regular operation, 28MHz is the FIFO memory's maximum value.A component normally has 5V power supplies attached to it.It is also possible to generate BYPASS REGISTER by using this FIFO memory.
72615L35PF8 Features
FIFOs category
Frequency at most
72615L35PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72615L35PF8 FIFOs Memory applications.
- Magnetic memories
- Switches
- Communications Systems
- Application that requires re-writable nonvolatile parameter memory
- Cardiac Monitoring Device
- Notebook
- Temporary storage elements
- A/D output buffers
- Queues for communication systems
- Emulators
