7283L12PAG
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
7283L12PAG Overview
You can find FIFO memory chip in the TSSOP package.In the shape of a Bulk , it's packaged.A Surface Mount mounting method is recommended.A supply voltage of 5V allows for high efficiency.The number of terminations in FIFO means is 56 .These are the 56 pins for operation.The maximum current required for its operation is 150mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 56 pins on this FIFO memory IC.The component normally owns 5V power supplies.This gadget can also generate RETRANSMIT .A clock on the FIFO memory IC runs at a frequency of 50MHz .
7283L12PAG Features
FIFOs category
Clock frequency of 50MHz
7283L12PAG Applications
There are a lot of Integrated Device Technology (IDT) 7283L12PAG FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- IP Camera Buffer
- Laser Receiver System
- Fabrication Site
- PC peripheral
- Controlled baseline
- Queues for communication systems
- Measurement Equipment
- Smart Meter
- General Data Collection Applications at Extreme High-Temperatures
