7283L15PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2005 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Access Time | 15 ns |
| Direction | Unidirectional |
| Density | 36 kb |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Programmable Flags Support | No |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7283L15PA Overview
FIFO memory chip is contained in the TSSOP package.The recommended mounting method for this FIFO products is Surface Mount .There are 56 pins on the operation pins.In order to operate FIFO design, a maximum current of 150mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.
7283L15PA Features
7283L15PA Applications
There are a lot of Integrated Device Technology (IDT) 7283L15PA FIFOs Memory applications.
- Video Processing
- GPS Offender Tracking
- Digital buffering
- Optical memories
- Seismic Data Collection at Extreme Temperatures
- High-speed graphics pixel buffer
- Video time base correction
- Thermal Management for DDR3 Memory Modules
- General Data Collection Applications at Extreme High-Temperatures
- Firmware loaders
