72841L25PFI8
| Parameters | |
|---|---|
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
72841L25PFI8 Overview
This package is included in TQFP .This FIFO memory chip is packaged as a Tape & Reel .Mounting it Surface Mount is recommended.A supply voltage of 5V allows for high efficiency.I found that it has 64 terminations in FIFO means.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A voltage of 5V should be used for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this board.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.During regular operation, 40MHz is the FIFO memory's maximum value.Normally, 5V power supplies are owned by the component.
72841L25PFI8 Features
FIFOs category
Frequency at most
72841L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72841L25PFI8 FIFOs Memory applications.
- Game Controller
- Computer networks
- Notebook
- Consumer
- General Data Collection Applications at Extreme High-Temperatures
- Network bridges
- Measurement Equipment
- Communications Systems
- Computer Systems
- Disk Controllers
