72851L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72851L10TF8 Overview
You can find FIFO memory chip in package LQFP .Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.There are 64 pins on the operation pins.Its maximum operating current is 80mA .In order to maximize efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , this gadget is self-contained.The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.As a result, it contains a total of 64 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.Normaly, the component is powered by 5V power supplies.
72851L10TF8 Features
FIFOs category
Frequency at most
72851L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72851L10TF8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Application that requires re-writable nonvolatile parameter memory
- HDD
- Communications
- Optical memories
- Networking
- TVs
- Game Consoles
- Smart Meter
- Game Controller
