72V2103L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 128KX18 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2103L7-5PF8 Overview
You can find FIFO memory chip in package TQFP .Memory IC's recommended mounted way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO consists of 80 terminations, which indicates that FIFO means is empty.The operation pins are 80 pins.The maximum current required for its operation is 35mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 3.45V V.Approximately 80 pins are attached to it.When the frequency is set to 133.3MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 133.3MHz .
72V2103L7-5PF8 Features
FIFOs category
Frequency at most
72V2103L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2103L7-5PF8 FIFOs Memory applications.
- One assembly
- Networking
- Signal processing
- Switches
- Laser Receiver System
- Telecommunication
- Portable Information Devices
- MP3 Interface for Automobile
- SPI Bus Flash Memory Device
- Magnetic memories
