72V215L10TFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V215L10TFG Overview
This package is included in TQFP .Surface Mount is memory IC's recommended mounting method.With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.As far as the operation pins are concerned, they are 64 pins.In order to operate it, it requires 30mA volts of current.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is contained within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It has a total of 64 pins on it.When the frequency is set to 100MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .Using this gadget, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V215L10TFG Features
FIFOs category
Frequency at most
72V215L10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72V215L10TFG FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Communications
- Fabrication Site
- Smart Meter
- IP Camera Buffer
- Networking
- Measurement Equipment
- MP3 Interface for Automobile
- Event Recorder
- Battery Charger
