72V221L15PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V221L15PFG8 Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V is capable of producing high efficiency.As a result of this, FIFO means contains 32 terminations.These are the 32 pins for operation.In order for FIFO design to operate, a maximum current of 20mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.There are a total of 32 pins on this board.During regular operation, the FIFO memory's maximum value is 66.7MHz .
72V221L15PFG8 Features
FIFOs category
Frequency at most
72V221L15PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V221L15PFG8 FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Thermal Management for DDR3 Memory Modules
- Magnetic memories
- Desktop Computers
- Emulators
- Temporary storage elements
- Network bridges
- Disk Controllers
- Consumer
- General Data Collection Applications at Low-Temperatures
