72V231L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L10PF8 Overview
FIFO memory chip is contained in the LQFP package.It comes in a Tape & Reel package.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.32 terminations are contained in FIFO means.32 pins are the operation pins.In order to operate FIFO design, a maximum current of 20mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 3V volts.The memory logic's maximum supply voltage is 3.6V volts.As a result, it contains a total of 32 pins.During regular operation, the FIFO memory's maximum value is 100MHz .
72V231L10PF8 Features
FIFOs category
Frequency at most
72V231L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V231L10PF8 FIFOs Memory applications.
- Portable Information Devices
- Measurement Equipment
- A/D output buffers
- Consumer Systems
- Data communications
- Switches
- Extended product-change notification
- High-speed graphics pixel buffer
- Computers
- SPI Bus Flash Memory Devices
