72V241L10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 36 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V241L10J Overview
FIFO memory chip can be found in the PLCC package.A Surface Mount mounting method is recommended.32 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 20mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .
72V241L10J Features
Frequency at most
72V241L10J Applications
There are a lot of Integrated Device Technology (IDT) 72V241L10J FIFOs Memory applications.
- MP3 Interface for Automobile
- Video
- Alarm System
- Transistors
- Medical Monitoring Device
- Firmware loaders
- Programmable Logic Controller
- Disk Controllers
- IP Camera Buffer
- Network bridges
