72V251L10PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
72V251L10PF8 Overview
FIFO memory chip is contained in the TQFP package.This FIFO memory chip is packaged as a Tape & Reel .A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains a total of 32 terminations.There are 32 pins on the operation pins.For its operation, 20mA is the maximum current required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 32 pins in total.When the frequency is set to 100MHz it can maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V251L10PF8 Features
FIFOs category
Frequency at most
72V251L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V251L10PF8 FIFOs Memory applications.
- Event Recorder
- Emulators
- Communications
- TVs
- Look-up Tables
- Consumer Systems
- Programmable Logic Controller
- Routers
- Temporary storage elements
- General Data Collection Applications at Low-Temperatures
